Ethernet – Based Switch Card

Ethernet – Based Switch Card


The Ethernet-Based Switch Card is used to control the operation of electrical devices by connecting to an Ethernet network. The devices can be controlled through a web browser on a computer or smart phone and do not need to download an application from the Internet for use.


يستخدم Ethernet – Based Switch Card فى التحكم فى تشغيل الأجهزة الكهربية من خلال إتصاله بشبكة الإيثرنت، ويمكن التحكم فى تشغيل الأجهزة من خلال متصفح الإنترنت Web Browser الموجود على أجهزة الكمبيوتر أو الهاتف الذكى، ولا يحتاج الى تنزيل تطبيق من على الإنترنت لإستخدامه.





Specifications

  1. The card controls 4 relays.
  2. 3 relays are controlled by buttons shown on the web browser.
  3. The fourth relay is controlled by temperature, where the user determines the temperature at which the relay operates through the internet browser.
  4. The card has an IP address, which can be easily changed from the software accompanying the card.
  5. The card is accessed through a password that can be easily changed from the software accompanying the card.
  6. Once the password is entered, the card can be controlled from any computer or smart phone.
  7. The operating state is stored for each relay, even if the power is cut off and then returned again, the relay is placed in the state it was in before the power cut off.
  8. If the card is hang, the card will reset itself within two seconds.
  9. The voltage is 220V AC.

المواصفات

  1. يتحكم الكارت فى 4 ريلاى.
  2. يتم التحكم فى 3 ريلاى من خلال مفاتيح تشغيل تظهر على متصفح الانترنت.
  3. يتم التحكم فى الريلاى الرابع من خلال درجة الحرارة، حيث يحدد المستخدم درجة الحرارة التى يعمل عندها الريلاى من خلال متصفح الانترنت.
  4. يعمل الكارت من خلال عنوان IP، يمكن تغييره بسهولة من البرنامج المصاحب للكارت.
  5. يتم الدخول على الكارت من خلال كلمة مرور يمكن تغييرها بسهولة من البرنامج المصاحب للكارت.
  6. بمجرد إدخال كلمة المرور يمكن التحكم فى الكارت من أى جهاز كمبيوتر أو هاتف ذكى.
  7. يتم تخزين حالة التشغيل لكل ريلاى، حتى إذا انقطع التيار الكهربى ثم عاد مرة اخرى، يتم وضع الريلاى فى الحالة التى كان عليها قبل قطع التيار الكهربى.
  8. فى حالة تعليق تشغيل الكارت، فان الكارت يقوم بعمل إعادة تشغيل لنفسه فى خلال ثانيتين.
  9. جهد الريلاى 220 فولت متردد.



Video showing the operation of the card